Haynes alloy 230
2017-03-13 10:49:59 Origin： Remark：0 Click：
Technical specification of Nickel alloy forgings Grade Haynes alloy 230 datasheet,Haynes alloy 230 Chemical compositions, Haynes grade 230 mechanical properties from Steelmaking, ESR melted, Blooming, Forging, Hot rolling, Haynes 230 Heat treatment, Straightening, Ultrasonic test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Haynes alloy 230
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Ni-Cr-W-Mo Alloy
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.05 ~ 0.015
Si (％): 0.25 ~ 0.75
Mn (％): 0.30 ~ 1.00
P (％) ≤: 0.030
S (％) ≤: 0.015
Cr (％): 20.0 ~ 24.0
Ni (％): Balance
Mo (％): 1.00 ~ 3.00
Cu (%): -
Mn (％): 0.30 ~ 1.00
P (％) ≤: 0.030
S (％) ≤: 0.015
Cr (％): 20.0 ~ 24.0
Ni (％): Balance
Mo (％): 1.00 ~ 3.00
Cu (%): -
Al (%): 0.20 ~ 0.50
Ti (%): -
Ce (%): -
Zr (%): -
Y (%): -
Nb (%): -
Co (%): ≤ 5.00
V (%): -
N (%): -
B (%): ≤ 0.015
La (%): 0.005 ~ 0.050
W (%): 13.0 ~ 15.0
W (%): 13.0 ~ 15.0
Ta (%): -
Fe (%): 3.0 max.
MECHANICAL PROPERTIES
Condition: Solution annealed
Tensile strength, σb/≥ MPa: 758
Yield strength, σ0.2/≥ MPa: 310
Elonghation, δ ≥(％): 40.0
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
Fe (%): 3.0 max.
MECHANICAL PROPERTIES
Condition: Solution annealed
Tensile strength, σb/≥ MPa: 758
Yield strength, σ0.2/≥ MPa: 310
Elonghation, δ ≥(％): 40.0
FORMS AND SHAPES
Round bar (Diameter): 0.20mm to 450mm
Square bar / Flat bar: 3mm to 500mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
- Email: lh.steel@hotmail.com
Previous page：N06230
Last page：ASTM A437 Gr.B4B
