F53
2026-07-24 17:50:00 Origin： Remark：0 Click：
ASTM A182 material specifications AISI F53 round bar stock supplier, plate F53 properties from steel melting, hot Bloomed, forged / rolled, heat treated
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - CNAS
TECHNICAL DATASHEET - F53
Material category: stainless steel round bar, wire rod, and semi-finished products
Steel type: austenitic stainless steel series
HS code for Customs: 72221100 / 72221900 / 72222000
Technical specification: ASTM A182, A632, A176
Typical chemical compositions (mass weight - %)
Carbon, C (％): ≤ 0.030
Manganese, Mn (％): ≤ 1.20
Silicon, Si (％): ≤ 0.80
Phosphorus, P (％): ≤ 0.030
Sulfur, S (％): ≤ 0.010
Nickel, Ni (%): 6.00 ~ 8.00
Chromium, Cr (%): 24.0 ~ 26.0
Molybdenum, Mo (%): 3.00 ~ 5.00
Nitrogen, N (%): 0.24 ~ 0.32
Copper, Cu (%): ≤ 0.80
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb ≥ MPa: 730
Yield strength, σ0.2 ≥ MPa: 515
Elonghation, δ5 ≥ (％): 15.0
Reduction of area, ф ≥ (％): -
Hardness | HB: 310 Max.
Yield strength, σ0.2 ≥ MPa: 515
Elonghation, δ5 ≥ (％): 15.0
Reduction of area, ф ≥ (％): -
Hardness | HB: 310 Max.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black in hot forging or rolling condition.
Final heat treatment - solution treatment + aged.
The alloy is usually produced by EAF AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black in hot forging or rolling condition.
Final heat treatment - solution treatment + aged.
PROFILE & DIMENSIONS
Round bar & rod & disc (diameter): 6.0 to 750 mm
Square bar & flat bar: 10 to 500 mm
Length: random length or based on the customer's special requirement.
Round bar & rod & disc (diameter): 6.0 to 750 mm
Square bar & flat bar: 10 to 500 mm
Length: random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T6 ~ 400 X W20 ~ 1200 X L1000 ~ 12000 mm
Sheet steel via cold rolled: T0.5 - 6mm X W15 ~ 1000 X L1000 ~ 2000 mm
Steel strip via cold rolled: T0.3 ~ 3 X W10 ~ 200 X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W15 ~ 1000 X L1000 ~ 2000 mm
Steel strip via cold rolled: T0.3 ~ 3 X W10 ~ 200 X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers - Email: sales@ccsteels.com
Previous page：2507 Duplex steel
Last page：UNS S32900
