AISI 430FR Stockist, AISI 430FR Equivalent Datasheet

AISI 430FR
2017-11-02 10:15:33   Origin:   Remark:0 Click:

Specifications 430FR Round bar, Inventory 430FR Ex-stock, Suppliers 430FR Property Steelmaking, ESR melting, Hot blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - ASTM A838. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade AISI 430FR

OFFICIAL TEST CERTIFICATE - issued by TUV - SGS -  BV
MATERIAL CATEGORY - Ferritic Stainless 
Steel 
TECHNICAL SPECIFICATIONS - ASTM A838
EQUIVALENT: EN 10083 Grade X6CrMoS17
MATERIAL FEATURES: Ugitech’s 430FR is a ferritic Stainless steel designed for soft magnetic components operating in corrosive environments.

CHEMICAL COMPOSITION (Mass weight - %)
C (%):    ≤ 0.065
Si (%):    1.00 ~ 1.50
Mn (%):  ≤ 0.80
P (%)≤:  0.030
S (%)≤:  0.25 ~ 0.40
Cr (%):   17.25 ~ 18.25
Mo (%):  ≤ 0.50
Ni (%):   ≤ 0.60
 
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, TS, σb/≥ MPa: 450 ~ 575
Yield strength, YS, σ0.2/≥ MPa: 320
Elongation, EL, δ ≥(%): 25.0
Reduction of area, RA, (%): 40.0
Annealed hardness, HBN ≤: 149 ~ 185
 
PRODUCT DESCRIPTION
The
alloy is usually produced by IFF + AOD + VD
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
 
ADVANTAGED STOCK
High alloy and Special steel
ASTM A565 Grade 616/422/S42200, Grade 615/S41800, XM-32/S64152, PH13-8/XM-13/S13800
FV520B /1.4594, PH15-7Mo /632 (S15700), 15-5PH /XM-12 (S15500), 17-4PH/630/1.4542, 17-7PH /631 (S17700),
851, 961, WB36, D6-AC, D6A. A-286/660, AM-350 /633 (S35000), AM-355 /634 (S35500), Custom 450/XM-25(S45000)
1.4980, X22CrMoV12-1/1.4923, 1.4935, 1.4938, 1.4913
Forms: Bars, Forge piece, Ring, Strip
Non-magnetic alloy
X40MnCrN19/1.3813, X8CrMnN18-18/1.3816, X40MnCr18/1.3817, N1310
Forms: Bars, Forge piece, Ring, Strip
 
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can do as follows:
EMAIL our qualified production engineers, Email:
sales@ccsteels.com.

Hot search:AISI 430FR

Previous page:AMS 6490
Last page:AMS 6491

Share to: