AISI 434 Stockist, AISI 434 Equivalent Steel

AISI 434
2014-10-08 16:08:38   Origin:   Remark:0 Click:

Description AISI 434 Inventory, Round bar AISI 434 Specifications, Suppliers AISI 434 Datasheet Chemical, Stocklist Properties Bar Forging Ex-stock & Plate Heat treatment Machined, Rod Exporters Ex-stock Sale - Technical standards - ASTM A276.or by agreement.100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.

 

OFFICIAL TEST CERTIFICATE: issued by TUV - SGS  BV

TECHNICAL DATASHEET - Grade 434
SPECIAL MELTING PROCESS - BEF + AOD / + ESR
MATERIAL CATEGORY - Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE - Ferrite stainless steel  series
HS Code For Customs - 72221100 / 72221900 / 72222000
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176,
CHEMICAL COMPOSITION (Mass Weight - %) 
C (%):     ≤ 0.12
Si (%):    ≤ 1.00
Mn (%):   ≤ 1.00
P (%)≤:   0.040
S (%)≤:   0.030
Cr (%):    16.0 ~ 18.0
Ni (%):     -
Mo (%):   0.75 ~ 1.25
MECHANICAL PROPERTY UNDER ROOM TEMP.
Forms: Round bar, flat bar, forgings and plate
Tensile strength, σb/≥ MPa: 450
Yield strength, σ0.2/MPa: 240
Elongation, δ ≥(%): 22.0
Reduction of area, ф ≥ (%): -
Hardness via heat treatment /HBW:  217 max.
PRODUCT DESCRIPTION
The 
alloy is usually produced by EAF AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged
AVAILABLE PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T60 - 400mm X W70 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: 
sales@ccsteels.com 

Hot search:AISI 434

Previous page:UNS S43036
Last page:UNS S43400

Share to: