S165M / S165 Stockist, S165M / S165 Equivalent Steel

S165M / S165
2020-03-04 17:34:15   Origin:   Remark:0 Click:

S165M is defined as a Martensitic Heat resisting Stainless Steel, Equivalent 1.4418 in form of round bar, Shaft Technical specifications, Melting, ESR & VAR technique, Blooming, Hot forging & Hot rolling, Heat treatment, Straightening, Ultrasonic flaw detection test.
  TECHNICAL DATA SHEET - Grade S165M

OFFICIAL TEST CERTIFICATE - issued by TUV - SGS -  BV
MATERIAL CATEGORY - S165M is a high strength low carbon matensitic stainless 
steel
SPECIAL MELTING PROCESS - BEF + AOD / + ESR
STEEL TYPE - Martensitic stainless steel series
INVENTORY & STOCK LIST - round bar diameter 16 / 22mm
HS Code For Customs - 72221100 / 72221900 / 72222000

CHEMICAL COMPOSITION (Mass weight - %)
Carbon, C (%):            ≤ 0.08
Silicon, Si (%):             0.30 ~ 0.70
Manganese, Mn (%):   0.60 ~ 1.50
Phosphorus, P (%) ≤:   0.030
Sulfur, S (%) ≤:             0.015
Chromium, Cr (%):       15.0 ~ 17.0
Nickel, Ni (%):              4.00 ~ 6.00
Molybdenum, Mo (%):  0.80 ~ 1.50
Nitrogen, N (%):            -

MECHANICAL PROPERTY UNDER ROOM TEMP.
Heat treatment condition: QT900
Tensile strength, σb/ ≥ MPa: 1050
Yield strength, σ0.2/ ≥ MPa: 920
Elongation, δ (%) ≥: 18.0
Reduction of area, ф (%) ≥: -
Hardness ≤ (HBW): 300 Min.

MELTING PROCESS
The 
alloy is usually produced by BEF + AOD / EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.

PRODUCT SHAPES AVAILABLE
Round bar (Diameter): 5.50 ~ 800mm
Wire rod (Diameter): 1.0 ~ 15mm
Flat bar (width X thickness): 15 ~ 100 X 10 ~ 650mm
Length: random length, fixed length or based on the customer's special requirement.
Form: Flat bar, forged slices and round bar.

TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry, pleased to EMAIL (
sales@ccsteels.com
) our resident team of qualified production engineers.

Hot search:S165M

Previous page:STR 36
Last page:S165M / 1.4418

Share to: