AISI 330
2020-07-25 09:02:45 Origin： Remark：0 Click：
Austenitic Steel AISI 330 Round bar, plate AISI 330 ESR & VAR technique, Hot forging & rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined.
STAINLESS STEEL DATASHEET - Grade AISI 330
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: 21Cr - 32Ni austenitic stainless
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 0.75
Manganese, Mn (％): ≤ 2.00
Phosphorus, P (％)≤: 0.040
Sulfur, S (％)≤: 0.030
Chromium, Cr (％): 19.0 ~ 23.0
Nickel, Ni (％): 30.0 ~ 34.0
Molybdenum, Mo (％): -
Other (％): Ti ≤0.60, Al ≤0.60
Silicon, Si (％): ≤ 0.75
Manganese, Mn (％): ≤ 2.00
Phosphorus, P (％)≤: 0.040
Sulfur, S (％)≤: 0.030
Chromium, Cr (％): 19.0 ~ 23.0
Nickel, Ni (％): 30.0 ~ 34.0
Molybdenum, Mo (％): -
Other (％): Ti ≤0.60, Al ≤0.60
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb/MPa: 670
Yield strength, σ0.2/MPa: 240
Elongation, δ(％): 30.0
Reduction of area, ф(％): -
Elongation, δ(％): 30.0
Reduction of area, ф(％): -
Hardness | HRB≤: 195
Cold bending property: N
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment.
AVAILABLE SHAPES & DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
AVAILABLE SHAPES & DIMENSIONS
Round bar (Diameter): 5.5 ~ 550mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip & rolled plate: T0.1 - 150mm X W5 - 1500mm X Random length (or in coil form).
Forging piece: Different shapes based on OEM.
Steel strip & rolled plate: T0.1 - 150mm X W5 - 1500mm X Random length (or in coil form).
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Previous page：AISI 330
Last page：ASTM A182 Gr.S31000
