X5CrNiCuNb17-4
2020-08-17 12:14:29 Origin： Remark：0 Click：
X5CrNiCuNb17-4 (EN 1.4542) is Precipitation hardening corrosion resisting steels, Available forms of Round bar, flat bar, plate, shaft and wire rod fabricated from Steelmaking, Blooming, Hot forging / rolling, Heat treated, 100% Ultrasonic flaw detection test, Cold machined.
MATERIAL SPECIFICATIONS - Grade DIN X5CrNiCuNb17-4
MATERIAL CATEGORY - Precipitation hardening corrosion resisting steels
INVENTORY ON SALES - Round bar dia. 5.5 ~ 240mm, flat bar 80 x 300 x Lmm
MELTING PROCESS - EAF + LF + VD / EF + ESR / VAR
MATERIAL SPECIFICATIONS - DIN 10088-1, 10297,10272,10312, DIN EN 10088-5
CHEMICAL COMPOSITION (Mass weight %)
Carbon, C (％): ≤ 0.07
Silicon, Si (％): ≤ 0.70
Manganese, Mn (％): ≤ 1.50
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.010
Chromium, Cr (％): 15.0 ～ 17.0
Nickel, Ni (％): 3.00 ～ 5.00
Molybdenum, Mo (％): -
Copper, Cu (％): 3.00～5.00
Silicon, Si (％): ≤ 0.70
Manganese, Mn (％): ≤ 1.50
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.010
Chromium, Cr (％): 15.0 ～ 17.0
Nickel, Ni (％): 3.00 ～ 5.00
Molybdenum, Mo (％): -
Copper, Cu (％): 3.00～5.00
Niobium, Nb (%): 0.15 ~ 0.45
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: hardening + Aged H900 / H950 / H1050 / H1150
Thickness/mm: 100
Tensile strength, σb/MPa: 1070 ~ 1270
Yield strength, σ0.2≥/MPa: 1000
Elongation, δ5 ≥(％): 10
Reduction of area, ψ≥ (％): -
Impact strength, Akv≥/J: 20
Yield strength, σ0.2≥/MPa: 1000
Elongation, δ5 ≥(％): 10
Reduction of area, ψ≥ (％): -
Impact strength, Akv≥/J: 20
Hardness HBS30: -
TYPICAL APPLICATIONS
Medical equipment, Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts, Pressure vessel.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts, Pressure vessel.
PRODUCT AVAILABLE PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 650mm
Square bar / Flat bar: 10mm to 800mm
Round bar / Wire rod (Diameter): 5.5mm to 650mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1200mm X L1000 - 5000mm
Sheet steel via cold rolled: T0.5 - 6mm X W60 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：X5CrNiCuNb17-4
Previous page：ASTM A182 Gr.S31600
Last page：X5CrNiMo16-5
