ASTM A182 Gr.S31703
2020-10-08 08:36:52 Origin: Remark:0 Click:
Specifications ASTM A182 Gr.S31703, Ex-stock ASTM A182 Gr.S31703 Datasheet, ASTM A182 Gr.S31703 Chemical Flat Bar Forging Ex-stock & Plate Heat treatment Machined, Rod ASTM A182 Gr.S31703 Exporters Ex-stock Sale - Technical standards - ASTM A182 - 2018.or by agreement.
TECHNICAL DATA SHEET - ASTM A182 Grade S31703
MATERIAL TECHNICAL STANDARDS - ASTM A182 - 2018
MATERIAL TYPE - 19Cr-14Ni-3Mo Austenitic Stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (%): ≤ 0.030
CHEMICAL COMPOSITION (WEIGHT %)
C (%): ≤ 0.030
Mn (%): ≤ 2.00
Si (%): ≤ 1.00
Si (%): ≤ 1.00
P (%)≤: 0.035
S (%)≤: 0.020
Cr (%): 18.0 ~ 20.0
S (%)≤: 0.020
Cr (%): 18.0 ~ 20.0
Ni (%): 11.0 ~ 15.0
Mo (%): 3.00 ~ 4.00
Nb (%): -
Ti (%): -
N (%): -
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 485
Yield strength, σ0.2/MPa: 175
Elongation, δ ≥(%): 30.0
Reduction of area, ф ≥ (%): 45.0
Hardness via heat treatment /HBW: -
Reduction of area, ф ≥ (%): 45.0
Hardness via heat treatment /HBW: -
HEAT TREATMENT PRACTICE
Condition: solution annealing
Cooling medium: water or oil cooling
Tempering temperature: 1040 Deg.C
PRODUCT MELTING & AVAILABLE DIMENSIONS
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.