AMS 5661 Stockist, AMS 5661 Equivalent Datasheet

AMS 5661
2022-11-02 08:10:38   Origin:   Remark:0 Click:

AMS 5661 is a Nickel-Iron Alloy, it offers good Corrosion and Heat-Resistant, Bars and Forgings 1 2.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.01 5B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated.
MATERIAL TECHNICAL SPECIFICATIONS - Grade AMS 5661
Material Category - Aerospace Material 
Steel Series
Techncial Specifications - AMS 5661F
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report - issued by TUV - SGS - BV

MAIN CHEMICAL COMPOSITIONS (mass weight %) 
Carbon, C (%):  ≤ 0.10
Manganese, Mn (%):  ≤ 1.00
Silicon, Si (%):  ≤ 0.60
Phosphorus, P (%)≤:  0.030
Sulfur, S (%)≤:  0.030
Chromium, Cr (%):  11.0 ~ 14.0
Nickel, Ni (%):  40.0 ~ 45.0
Molybdenum, Mo (%): 5.00 ~ 7.00
Titanium, Ti (%): 2.35 ~ 3.10
Aluminum, Al (%): 0.35
Boron, B (%): 0.010 ~ 0.020,
Coppper, Cu (%): 0.50
Cobalt, Co (%): 1.00
Lead, Pd (%): 5 ppm
Bismuth, Bi (%): 0.3 ppm
Ferrum, Fe (%): balance.

MECHANICAL PROPERTIES UNDER ROOM TEMP.
Shapes: bars and forgings
Tensile strength, σb/MPa:  1135
Yield strength, σ0.2/MPa:  827
Elongation, δ(%):  12.0
Reduction of area, ф (%):  15.0
Hardness under solution condition | HBW:  -
Hardness under precipitation heat treatment condition | HBW:  302 ~ 388

RELEVANT STANDARDS FOR REFERENCE
ASTM E8 - Tension Testing of Metalic Materials.
AMS2261 Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire
AMS2269 Chemical Check Analysis Limits, Nickel, Nickel Alloys, and Cobalt Alloys
AMS2371 Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant Steels and Alloys, Wrought Products and Forging Stock
AMS2374 Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant Steel and Alloy Forgings
AMS2806 Identification, Bars, Wire, Mechanical Tubing, and Extrusions, Carbon and Alloy Steels and Corrosion and Heat-Resistant Steels and Alloys
 
MELTING PROCESS & APPLICATION
This 
alloy is generally smelt in Basic Electric Furnace (EAF, AOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on. These products have been used typically for parts requiring corrosion and heat resistance and subject to very rigid inspection standards, especially when such parts are welded during fabrication, for parts requiring oxidation resistance up to 1500 °F (816 °C) 

ADVANTAGE & SUPERIOR SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special 
material 
is welcome.

AVAILABLE SHAPES & DIMENSIONS
Round bar (Diameter): 5.5 to 450mm
Square bar / Flat bar (Thickness X width): 10 to 550mm
Wire rod (Diameter): 1.0 to 10.0mm
Steel strip: THK0.5 ~ 3.0, width 10 ~ 200mm
Length: fixed length, random length, or based on the customer's special requirement.

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.

Hot search:AMS 5661

Previous page:W-Nr. 1.2739
Last page:AMS 5662

Share to: