X14CrMoVNbN10-1
2024-04-01 09:03:13 Origin： Remark：0 Click：
Quenched and tempered Martensitic Steel X14CrMoVNbN10-1 high temperature alloy steel is used for larger preshaped components in turbine and generator installations, shafts and discs.
MATERIAL TECHNICAL DATASHEET - Grade X14CrMoVNbN10-1
Material Category: Hardened and tempered steel
Material Specification - SEW 555 or by agreement
Melting process way - EF + Consumable electrode remelted
HS code for Customs: 7228 4000 / 7228 5000 / 7228 6000
Main Chemical composition (mass weight - %)
Carbon, C (％): 0.10 ~ 0.16
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50 ~ 0.60
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 10.0 ~ 11.00
Molybdenum, Mo (％): 1.40 ~ 1.60
Nickel, Ni (％): 0.50 ~ 0.70
Vanadium, V (％): 0.15 ~ 0.25
Others (％): Niobium 0.04 ~ 0.06, Nitrogen 0.04 ~ 0.06,
Material Category: Hardened and tempered steel
Material Specification - SEW 555 or by agreement
Melting process way - EF + Consumable electrode remelted
HS code for Customs: 7228 4000 / 7228 5000 / 7228 6000
Main Chemical composition (mass weight - %)
Carbon, C (％): 0.10 ~ 0.16
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50 ~ 0.60
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 10.0 ~ 11.00
Molybdenum, Mo (％): 1.40 ~ 1.60
Nickel, Ni (％): 0.50 ~ 0.70
Vanadium, V (％): 0.15 ~ 0.25
Others (％): Niobium 0.04 ~ 0.06, Nitrogen 0.04 ~ 0.06,
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Hot working temperature /℃: 1050 ~ 850
Hardness after annealing ≤HBS: 277
Tensile strength, |σb≥/MPa: 700 ~ 850
Yield strength, |σs≥/MPa: 600
Elongation, |δ5≥/(%): 15.0
Reduction of area, |ψ≥/(%): 40.0
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / VD / LF, AOD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched and tempered.
FORMS & DIMENSIONS AVAILABLE
Round bar / Disc (diameter): 5.5mm to 1000mm
Square bar / Flat bar: 8mm to 600mm
Steel sheet: thickness 1.0 ~ 4.0mm, width 10 ~ 1000mm X length 1000/2000mm - Standard size
Length: random length or based on the customer's special requirement
Forged steel shape: stepped shafts, other different shapes based on OEM
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to email or call our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Hot working temperature /℃: 1050 ~ 850
Hardness after annealing ≤HBS: 277
Tensile strength, |σb≥/MPa: 700 ~ 850
Yield strength, |σs≥/MPa: 600
Elongation, |δ5≥/(%): 15.0
Reduction of area, |ψ≥/(%): 40.0
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / VD / LF, AOD followed by electroslag refining (ESR) if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition, or bright annealing specially.
Final heat treatment - Quenched and tempered.
FORMS & DIMENSIONS AVAILABLE
Round bar / Disc (diameter): 5.5mm to 1000mm
Square bar / Flat bar: 8mm to 600mm
Steel sheet: thickness 1.0 ~ 4.0mm, width 10 ~ 1000mm X length 1000/2000mm - Standard size
Length: random length or based on the customer's special requirement
Forged steel shape: stepped shafts, other different shapes based on OEM
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to email or call our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Hot search：X14CrMoVNbN10-1
Previous page：DTD 2 / MSRR 6004
Last page：最后一页
