AMS 5512
2025-08-13 08:56:40 Origin： Remark：0 Click：
Austenitic Stainless Steel Corrosion and Heat-Resistant AMS 5512 Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (SAE 30347) solution heat treated, cold drawn rod
TECHNICAL DATA SHEET - AMS 5512
Stock available: Plate, Sheet, Strip
Material Category: Austenitic type 19Cr - 10.0Ni stainless
Stock available: Plate, Sheet, Strip
Material Category: Austenitic type 19Cr - 10.0Ni stainless
Material Specifications: AMS 5512L
H S Code For Customs: 7220 2030 / 7220 1200 / 7220.1100
AMS 5511 is usually produced by EAF + AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Material supply of condition: cold rolled, solution heat treated, and, unless solution heat treatment is performed in an atmosphere yielding a brightfinish, descaled having a surface appearance in accordance with ASTM A 480/A 480M.
H S Code For Customs: 7220 2030 / 7220 1200 / 7220.1100
AMS 5511 is usually produced by EAF + AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Material supply of condition: cold rolled, solution heat treated, and, unless solution heat treatment is performed in an atmosphere yielding a brightfinish, descaled having a surface appearance in accordance with ASTM A 480/A 480M.
TYPICAL CHEMICAL COMPOSITIONS (mass fraction %)
Carbon, C (％): ≤ 0.08
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 2.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.020
Chromium, Cr (％): 17.0 ~ 19.0
Nickel, Ni (％): 9.00 ~ 12.0
Niobium, Nb (%): 10 X C ~ 1.10
Molybdenum, Mo (％): ≤ 0.75
Copper, Cu (%): ≤ 0.75
Ferrum, Fe (%): balance.
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Conditon: hot or cold rolled
Tensile strength, Rm ≥ MPa: 483 ~ 724
Yield strength, Ro0.2 / MPa: 172
Elongation, A5 ≥ (％): 40.0
Reduction of area, Z ≥ (％): -
Hardness via heat treatment / HRC: -
Reduction of area, Z ≥ (％): -
Hardness via heat treatment / HRC: -
TECHNICAL SALES ASSISTANCE & SERVICE
If you are interested in our products or services, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers or sales department.
Raw Material Stock Available
Custom 450 / GD450 / XM-25 (S45000), 403 ESR, AISI 616 / 422 ESR, B50A365 / 403Cb+
17-4PH / 630, M-152 / 1.4938 / S151D, FV520B / S143 / 1.4594. X22CrMoV12-1
13Х11Н2B2MФ / AE961W, 11Х11Н2B2MФ / 16Х11Н2B2MФ
AISI 615 / S41800, 15-5PH / XM-12 (S15500), A-286 AISI 660 / S66286
10705BU, 10705MBU, 10705AJ, S132, S131, S111, S159, S154
