1.4594
2014-12-16 10:54:52 Origin： Remark：0 Click：
Martensitic corrosion resisting steel 1.4594 Round bar, flat bar, forgings X5CrNiMoCuNb14-5 steel making, ESR remelted, Hot forging/rolling, heat treatment.
TECHNICAL DATA SHEET - Grade W-Nr 1.4594
Material category - Martensitic corrosion resisting steels
Material specifications - DIN EN 10088-3, 10297,10272,10312,10088-5(2005)
Official Test Certificate - issued by TUV - SGS - BV
HS Code For Customs - 72201100 / 72202030 / 72221100
Inventory & Stocklist - Diameter 60 ~ 150mm
Inventory & Stocklist - Diameter 60 ~ 150mm
Chemical elements (mass weight - %)
Carbon, C (％): ≤ 0.07
Silicon, Si (％): ≤ 0.70
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 13.0 ~ 15.0
Molybdenum, Mo (％): 1.20 ~ 2.00
Nickel, Ni (％): 5.00 ~ 6.00
Silicon, Si (％): ≤ 0.70
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 13.0 ~ 15.0
Molybdenum, Mo (％): 1.20 ~ 2.00
Nickel, Ni (％): 5.00 ~ 6.00
Niobium, Nb (%): 0.15 ~ 0.60
Copper, Cu (%): 1.20 ~ 2.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Hardness HB under annealed: 360 max.
Yield strength σ0.2≥/MPa: 720
Tensile strength σb/MPa: 930
Elongation δ(lengthways)≥(％): 15.0
Elongation δ(crosswise)≥(％): -
Impact absorbing power Akv≥/J| lengthways : -
Impact absorbing power Akv≥/J| crosswise: -
Tensile strength σb/MPa: 930
Elongation δ(lengthways)≥(％): 15.0
Elongation δ(crosswise)≥(％): -
Impact absorbing power Akv≥/J| lengthways : -
Impact absorbing power Akv≥/J| crosswise: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged.
TYPICAL APPLICATIONSThe alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment + aged.
Medical equipments and Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolts and nuts, Pressure vessel.
Bolts and nuts, Pressure vessel.
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 450mm X W50 - 1000mm X L1000 - 5000mm
Heavy/middle plate via hot rolled: T60 - 450mm X W50 - 1000mm X L1000 - 5000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. - Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. - Email: sales@ccsteels.com.
Hot search：1.4594
Previous page：X5CrNiMoCuNb14-5
Last page：X1CrNb15
