Nitronic 40 datasheet,Nitronic 40 chemical,Nitronic 40 heat treatment

Nitronic 40
2015-07-01 08:55:08   Origin:   Remark:0 Click:

Material specification stainless steel Nitronic 40 datasheet,alloy Nitronic 40 Chemical, Ring forging, Nitronic 40 round bar, Wire rod, Sheet - steelmaking, Nitronic 40 Electroslag melting, Blooming, Ultrasonic test, Nitronic 40 Forging, Rolling, Heat treatment, Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing. Technical Standards - ASTM A276, A580 or By agreement.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS BV

TECHNICAL SPECIFICATION DATASHEET - Nitronic 40 & AMS 5656
MATERIAL CATEGORY: Austenitic Stainless Steel bar
Technical standards: ASTM A276. A580
CHEMICAL COMPOSITION (WEIGHT %)
MECHANICAL PROPERTIES UNDER ROOM TEMP. 
Tensile strength, σb/MPa: 655 min.
Yield strength, σ0.2/MPa: 330 min.
Elongation, δ (%): 30 min.
Reduction of area, ф (%):  -
Hardness (HBW):  -
Hardness | HRB:  -
Cold bending property: None
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of
stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements. 

TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail:
lh.steel@hotmail.com
PRODUCT PROFILE
Round bar / Wire rod (Diameter1): 0.50mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.       

Hot search:Nitronic 40

Previous page:Cryogenic Tenelon
Last page:AMS 5656 / Nitronic 40

Share to: