Z12CNDV12
2025-10-31 06:13:00 Origin： Remark：0 Click：
Turbine blade steel Z12CNDV12 peeled round bar, 1.4938 ESR ingot, milled flat bar stock available, hot forged & rolled, cold drawn, heat treated
MATERIAL DESIGNATION - Z12CNDV12
H S code - 72221100 , 72221900, 7222 3000
Stock available - diam. 40 ~ 210mm, ESR ingot
Typical chemical elements (mass fraction %)
Carbon, C (％): 0.08 ~ 0.13
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50 ~ 0.90
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 2.00 ~ 3.00
Molybdenum, Mo (％): 1.50 ~ 2.00
Manganese, Mn (％): 0.50 ~ 0.90
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.025
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 2.00 ~ 3.00
Molybdenum, Mo (％): 1.50 ~ 2.00
Nitrogen, N (%): 0.01 ~ 0.05
Vanadium, V (%): 0.25 ~ 0.40
Copper, Cu (%): ≤ 0.50
MECHANICAL PROPERTIES AT ROOM TEMP.
Heat treatment condition / Bar: 1010 ℃ quenched air or oil cooled
≥ 560 ℃, tempered, air cooling.
Tensile strength, Rm ≥ MPa: 930 ~ 1130
Yield strength, Rp0.2 ≥ MPa: 780
Elongation, A5 ≥ (％): 14.0
Elongation, A5 ≥ (％): 14.0
Reduction of area , Z ≥ (％): -
Hardness | HB: 286 ~ 352
SHAPES AND DIMENSION
Round bar & disc (diameter): 6.0 ~ 800 mm
Square bar / flat bar: 8 ~ 600 mm
Heavy / middle plate via hot rolled: T60 ~ 400 X W70 ~ 1200 X L1000 ~ 5000mm
Forging piece: stepped shafts, other different shapes based on OEM.
Square bar / flat bar: 8 ~ 600 mm
Heavy / middle plate via hot rolled: T60 ~ 400 X W70 ~ 1200 X L1000 ~ 5000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to Email our resident team of qualified production engineers. E-mail: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to Email our resident team of qualified production engineers. E-mail: sales@ccsteels.com
Hot search：Z12CNDV12
Previous page：26NiCrMoV11-5
Last page：SUS316TKA
