NF X50CrMoV15
2026-06-15 10:50:00 Origin： Remark：0 Click：
Material technical specifications of NF EN 10088-2 2005 type EN X50CrMoV15 stainless steel plate and strip EN X50CrMoV15 ESR melting, hot bloomed, UT, heat treated
TECHNICAL DATA SHEET - X50CrMoV15
Type of steel: martensitic and precipitation hardening steel
Official test certificate: issued by TUV - SGS - CNAS
Material category: stainless steel plate and strip
Technical standards: NF EN 10088-2 2005
typical chemical compositions (mass weight - %)
Carbon, C (％): 0.45 ~ 0.55
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 14.0 ~ 15.0
Molybdenum, Mo (%): 0.50 ~ 0.80
Nickel, Ni (％): -
Vanadium, V (%): 0.10 ~ 0.30
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: cold rolled steel strip
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: cold rolled steel strip
Annealed hardness: 280HBW max.
Tensile strength, σb ≥ MPa: 850 max.
Yield strength, σ0.2 ≥ MPa: -
Elongation, δ5 ≥ (％): 12.0
Tensile strength, σb ≥ MPa: 850 max.
Yield strength, σ0.2 ≥ MPa: -
Elongation, δ5 ≥ (％): 12.0
QT hardness: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
PRODUCT PROFILE
Heavy/middle plate via hot rolled: T3 ~ 200 X W20 ~ 1500 X L1000 ~ 12000 mm
Sheet steel via cold rolled: T0.5 ~ 3 X W15 ~ 1000 X L1000 ~ 2000 mm
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
PRODUCT PROFILE
Heavy/middle plate via hot rolled: T3 ~ 200 X W20 ~ 1500 X L1000 ~ 12000 mm
Sheet steel via cold rolled: T0.5 ~ 3 X W15 ~ 1000 X L1000 ~ 2000 mm
Steel strip via cold rolled: T0.1 ~ 3 X W10 ~ 300 X L mm (or in coil form)
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers - Email: sales@ccsteels.com
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers - Email: sales@ccsteels.com
Hot search：NF X50CrMoV15
Previous page：EN X2CrMoTi29-4
Last page：SKS51M
Total list
Monthly rank
- 24ASTM A565 Grade 616
- 21ASTM A538 / AMS 6514
- 19Z15CN24-13
- 19N06102
- 16ASTM 301
- 15S41425
- 15X1CrNiMoCu12-5-2
- 15STS321
- 14Z4CNUD17-11-03FF
- 14BS S126