UNS S32304
2014-09-28 11:04:24 Origin： Remark：0 Click：
Specification S32304 Suppliers, Stocklist S32304 Inventory, Round bars S32304 forging Wire rod - steelmaking, ESR, Blooming, Hot forging, Rolling, Heat treat, Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
MATERIAL DATA SHEET - UNS S32304
MATERIAL CATEGORY: 24Cr-5Ni-Mo-Cu-N Austenite-Ferrite type
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
AVAILABILITY
Round bar / flat bar / strip / hollow bar / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 650mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.1mm to 300mm
Width: 8mm to 1500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5mm to 650mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.1mm to 300mm
Width: 8mm to 1500mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
CHEMICAL COMPOSITION (WEIGHT %) - UNS S32304 / ASTM 2304
C (％): ≤ 0.030
Si (％): ≤ 1.00
Mn (％): ≤ 2.50
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 21.5 ~ 24.5
Ni (％): 3.00 ~ 5.50
Mo (％): 0.05 ~ 0.60
N (%): 0.05 ~ 0.20
Cu (％): 0.05 ~ 0.60
Si (％): ≤ 1.00
Mn (％): ≤ 2.50
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 21.5 ~ 24.5
Ni (％): 3.00 ~ 5.50
Mo (％): 0.05 ~ 0.60
N (%): 0.05 ~ 0.20
Cu (％): 0.05 ~ 0.60
Form: round bar, hollow bar, forgings
Condition: annealing
Tensile strenght, σb/MPa: 600
Yield strenght, σ0.2/MPa: 400
Elongation, δ (％): 25
Reduction of area, ф (％): -
Elongation, δ (％): 25
Reduction of area, ф (％): -
Hardness | HRC(HBS): 30.5
Form: plate,steel,strip
σb/MPa: 600
σ0.2/MPa: 400
δ(％): 25
ф(％): -
δ(％): 25
ф(％): -
Hardness | HRC(HBW): 32 (290)
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Previous page：ASTM 2304
Last page：UNS S32506
