2022-10-26 18:04:33 Origin： Remark：0 Click：
RAW MATERIAL SPECIFICATIONS - Grade AMS 5660
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5660L
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report - issued by TUV - SGS - BV
MAIN CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): ≤ 0.10
Manganese, Mn (％): ≤ 1.00
Silicon, Si (％): ≤ 0.60
Phosphorus, P (％)≤: 0.030
Sulfur, S (％)≤: 0.030
Chromium, Cr (％): 11.0 ~ 14.0
Nickel, Ni (％): 40.0 ~ 45.0
Molybdenum, Mo (%): 5.00 ~ 7.00
Titanium, Ti (%): 2.35 ~ 3.10
Aluminum, Al (%): ≤ 0.35
Boron, B (%): 0.010 ~ 0.020,
Coppper, Cu (%): ≤ 0.50
Cobalt, Co (%): ≤ 1.00
Lead, Pd (%): ≤ 5 ppm
Bismuth, Bi (%): ≤ 0.3 ppm
Ferrum, Fe (%): balance.
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Shapes: bars and forgings
Tensile strength, σb/MPa: 1034
Yield strength, σ0.2/MPa: 689
Elongation, δ(％): 12.0
Reduction of area, ф (％): 15.0
Hardness under solution condition | HBW: -
RELEVANT STANDARDS FOR REFERENCE
ASTM E8 - Tension Testing of Metalic Materials.
AMS2261 Tolerances, Nickel, Nickel Alloy, and Cobalt Alloy Bars, Rods, and Wire
AMS2269 Chemical Check Analysis Limits, Nickel, Nickel Alloys, and Cobalt Alloys
AMS2371 Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant Steels and Alloys, Wrought Products and Forging Stock
AMS2374 Quality Assurance Sampling and Testing, Corrosion and Heat-Resistant Steel and Alloy Forgings
AMS2806 Identification, Bars, Wire, Mechanical Tubing, and Extrusions, Carbon and Alloy Steels and Corrosion and Heat-Resistant Steels and Alloys.
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
ADVANTAGE & SUPERIOR SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
Round bar (Diameter): 5.5 to 450mm
Square bar / Flat bar (Thickness X width): 10 to 550mm
Wire rod (Diameter): 1.0 to 10.0mm
Steel strip: THK0.5 ~ 3.0, width 10 ~ 200mm
Length: fixed length, random length, or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: email@example.com.