2022-09-27 11:03:59 Origin： Remark：0 Click：
RAW MATERIAL SPECIFICATIONS - Grade AMS 5650
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5650E
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report - issued by TUV - SGS - BV
MAIN CHEMICAL COMPOSITIONS (Mass weight %)
Carbon, C (％): ≤ 0.08
Manganese, Mn (％): ≤ 2.00
Silicon, Si (％): ≤ 1.00
Phosphorus, P (％)≤: 0.040
Sulfur, S (％)≤: 0.030
Chromium, Cr (％): 22.0 ~ 24.0
Nickel, Ni (％): 12.0 ~ 15.0
Molybdenum, Mo (%): ≤ 0.75
Copper, Cu (%): ≤ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Shapes: bars and forgings
Tensile strength, σb/MPa: 515
Tensile strength, σb/MPa: 862 max. (wire rod)
Yield strength, σ0.2/MPa: 205
Elongation, δ(％): 40.0
Reduction of area, ф (％): -
Hardness under aged condition | HBW: -
Hardness under solution condition | HBW: 187 Max.
RELEVANT STANDARDS FOR REFERENCE
AMS 2248 - Chemical Check Analysis Limits, Wrought Corrosion and Heat-resisiant Steels And Alloys, Maraging and other High-alloy Steels, and Iron Alloys.
ASTM A370 Mechanical Testing of Steel Products.
AMS 2371 Quality Assureance Sampling and testing, Corrosion and Heat-resitant Steels and Alloys, worought Products and Forgings stock.
AMS 2806 Identification, Bars, Wire, Mechanical Tubing and Extrusions, Carbon and Alloy Steels and Corrosion and heat-Resistant Steels and Alloys.
AMS 2241 Torlerance, Corrosion and Heat-Resistant Steel, Iron Alloy, Titanium, and Titanium Alloy Bars and Wire.
ASTM E353 Chemical Analysis of Stainless Heat-Resisting,Maraging and Other Similar Chromium-Nickel-Iron Alloys
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement. It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on. These products have been used typically for parts requiring both Corrosion and heat resistance up to 1093°C.
SHAPES & DIMENSIONS AVAILABLE
Round bar (diameter, mm): 5.5 to 550
Square bar / Flat bar (thickness X width, mm): 10 to 800
Wire rod (diameter, mm): 3.0 to 13.0mm
Steel strip: THK0.5 ~ 3.0, Width 10 ~ 1220mm
Length: Fixed length or random length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: email@example.com.